Doepfer A-180-2

£20.00

The Doepfer A-180-2 Multiples is a simplistic module with powerful capabilities that allows you to multiply any audio or control signal.

Out of stock

Compare

Description

Doepfer A-180-2 Multiples

Eurorack Module

The Doepfer A-180-2 Multiples is a simplistic module with powerful capabilities. Equipped with eight inter-connected sockets, the A-180-2 allows you to multiply any audio or control signal. As standard, the A-180-2 provides you with two 4-fold multiples, but this can be adjusted to a single 8-fold multiple using a solder bridge on the PCB. Perfect for distributing CVs or clock signals, the Doepfer A-180-2’s function is vital in many modular setups, and this 2HP module is the perfect choice for any system.

2 x 4-Fold or Single 8-Fold

This Doepfer A-180-2 can be adjusted to work as either a single 8-fold multiple, or two 4-fold multiples. This can be done by removing the internal solder link between sockets 4 and 5 (the middle two sockets on the module). Doing so would split the eight interconnected sockets into two groups. Group 1 would consist of sockets 1 to 4 (the top 4 sockets), whilst Group 2 would consist of sockets 5 to 8 (the bottom 4 sockets). This solder link is not present to begin with, and would require you to add it to the circuit to switch to the 8-fold multiple configuration from the factory-set 2 x 4-fold configuration.

Specifications

  • Width: 2HP / 10mm
  • Depth: 10mm (Measured from the rear of the front plate)
  • Power Requirement/Current:
    • +12V: 0mA
    • -12V: 0mA

This Doepfer A-180-2 is in Excellent Condition and comes with it’s Original Box and Screws. PLUS we’re Also Including a PATCH CABLE!

Stock picture

Reviews

There are no reviews yet.

Be the first to review “Doepfer A-180-2”

Your email address will not be published. Required fields are marked *